TA-53
Facility Specific Training
Course Number 34095
Introduction:
A guided tour of the TA-53 facilities is suggested prior to or shortly after taking this training to give you a better understanding of the layout of the facilities discussed on the following pages.
This web based training is presented
in seven distinct sections, or modules.
There is a link to the quiz at the end of the Lessons Learned section.
The quiz questions are based on the objectives associated with this training,
and listed on the right. You must score at least 80% on the quiz to receive
credit for this training.
Retraining for this course is required every 24 months. Workers who are retraining are only required to go through the “Lessons Learned” section and pass the quiz.
Terminal Objective:
At the completion of the TA-53 Facility
Specific Training (FST) the trainee will be able to demonstrate an understanding
of the procedures for accessing TA-53 facilities, hazards present at TA-53
and the controls used to mitigate those hazards.
Enabling Objectives:
At the completion of this training the
trainee will be able to:
- E.O.1. Describe the process for entering TA-53 when the main entrance gate is open or closed.
- E.O.2. Recognize the safety chain of responsibility for at LANL.
- E.O.3. Recognize stop-work responsibilities.
- E.O.4. Recognize the steps involved in Integrated Work Management (IWM) at the Laboratory
- E.O.5. Given a hazard, identify the associated controls at TA-53.
- E.O.6. Identify the kinds of information found on hazard postings.
- E.O.7. Recognize the requirements for removing anything from an area controlled for radiological purposes.
- E.O.8. Recognize responsibilities associated with the generation of waste.
- E.O.9. Given a scenario, select the appropriate action to take during and emergency or incident.
- E.O.10. Identify the correct response to building-wide alarms, contamination alarms, or gate alarms.
